Suggested Engineering Specifications
Design Draft Barriers shall be 5″or 6″ high and 3″wide. The front cover shall be 14 gauge (12GA, WSBST) aluminum construction suitable for architectural, commercial and industrial use with 1/4″pencil proof top and discharge. The one piece cover shall be extruded aluminum for maximum strength and shall be available in lengths to 14′.
The front cover shall snap fit to the back cover with no screw heads or assembly fasteners. The back cover shall be suitable for mullion to mullion mounting.
Standard painted finishes shall be provided.
ELEMENT
Heat sections from 2′ to 10′ are available.
Furnish and install model EMB or SLT type heating element. The element shall be manufactured with 3/4″ and 1″ nominal copper tubing with .010″ thick aluminum fins, having full collars for uniform spacing and optimum thermal contact. Fins shall be mechanically bonded to the copper tube. One end of each element shall be expanded to accept the unepanded end of another tube without coupling.
ELEMENT MOUNT BRACKET
Element bracket is constructed of 16 gauge galvenized steel and are mounted to the backplate for noiseless expansion of element. Designed for easy installation into pre-punched mounting holes.
Elements are supplied with nylon brackts for noiseless expansion.
INSTALLATION FEATURES
Model WSB construction allows simple, snap-fit installation. The back plate which houses the heating element assembly is simply attached to the wall surface at the desired height and the front cover enclosure is then snapped into place.
PEDESTAL FEATURES
Model WSBT-PD, WSBF-PD, WSBST-PD shall have 2″ adjustable pedestals and the heater back will be painted to match the front cover. 1″of adjustment is available on the cast iron pedestal.
PEDESTAL QUANTITIES
2 on 1′, 2′, 3′, 4′, 5′ and 6′
3 on 7′, 8′, 9′ and 10′
RATING EMB ELEMENT
| Model | Flow Rate | 170 O | 180 O | 190 O | 200 O | 210 O | 220 O | 230 O | 240 O |
| 3/4″ | 4 GPM
1 GPM |
540
510 |
600
570 |
680
640 |
734
690 |
790
750 |
870
820 |
940
890 |
1010
960 |
RATING SLT ELEMENT
| Model | Flow Rate | 170 O | 180 O | 190 O | 200 O | 210 O | 220 O | 230 O | 240 O |
| 3/4″ | 4 GPM
1 GPM |
620
580 |
710
670 |
800
760 |
890
840 |
970
920 |
1070
1010 |
1150
1090 |
1250
1180 |