Q: What is the longest enclosure you can make without freight damage?
Twelve feet long.
Q: What is the longest heater length?
Ten feet long, but we can place up to twelve feet of heat on a 12′ long enclosure using, as an example, 2 – 6′ heaters on the 12′ backplate.
Q: Are blank section punched with slots for air inlet and discharge?
No. Regular blanks have no holes or slots unless specified.
Q: Can custom colors be painted?
Yes. The factory requires a color chip or sample to match.
Q: What can be installed for controls in a standard unit?
A thermostat in one junction box and a disconnect in the other.
Q: What are control sections used for?
When you need any other control other than a stat or disc.
Q: Are duplex recepticles available?
Yes. You need a front cover that is not part of the heater front. (Example: 6’6″ back with 6′ heat on the left and a 6′ front and a 6″ front with duplex to be snapped to the back plate.)
Q: What is the difference between a power relay and a transformer relay?
A power relay has to be fed 24 volt to power the contacts. A transformer relay produces 24 volt from the coil.
Q: Can a custom made heater be produced for a specific project?
Yes. New dies can be made and testing at U.L. can be performed, however, there are costs associated with this option.
Q: What is the delivery for anodized finish vs. painted finish?
You can add at least 4 weeks to the delivery, plus there is added cost also.