Model LB features a tubular heating element with fins bonded to the sheath.
To prevent overheating in cases where the air discharge may be blocked, full length thermal overload protection is provided. The vacuum charged capillary automatically restores operation when the cause for overheating is removed. To ensure quiet operation, the heating element is center anchored and free floating at each end on nylon bushings.
Model LB construction allows simple, snap-fit installation. The back plate which houses the heating element assembly is simply attached to the wall surface at the desired height and the front cover enclosure is then snapped into place.
Model LBT-PD, LBF-PD shall have 2″ adjustable pedestals and the heater back will be painted to match the front cover. 1″ of
adjustment is available on the cast pedestal.
2 on 1′, 2′, 3′, 4′, 5′ and 6′
3 on 7′, 8′, 9′ and 10′